EL2535 | EtherCAT Terminal, 2-channel PWM output, 24 V DC, 1 A, current-controlled

The EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated from the E-bus. The current values (0 to maximum output current) are specified by the automation device through a 16-bit value. The output stages are protected against overload and short circuit. Each EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

Special features:

2 PWM outputs with push-pull output stage
Suitable for inductive loads > 1 mH
±1 A max. output current per channel at 24 V DC rated voltage

https://www.beckhoff.com/vi-vn/products/i-o/ethercat-terminals/el2xxx-digital-output/el2535.html

Thông tin sản phẩm

el2535

Các sản phẩm cùng loại

EL2624 \| EtherCAT Terminal, 4-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC	EL2022 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A	EL2521 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, RS422, 50 mA
ELM2744-0000 \| EtherCAT Terminal, 4-channel solid state relay output, multiplexer, 48 V AC/DC, 1 A, potential-free, 1 x 4	EL2521-0124 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, 24 V DC, 1 A, with capture/compare input/output	EL2252 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp
EL2024 \| EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A	ELM2742-0000 \| EtherCAT Terminal, 2-channel solid state relay output, multiplexer, 48 V AC/DC, 1 A, potential-free, 1 x 4	EL2722 \| EtherCAT Terminal, 2-channel triac output, 12…230 V AC, 1 A

EL2624 \| EtherCAT Terminal, 4-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC	EL2022 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 A	EL2521 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, RS422, 50 mA
ELM2744-0000 \| EtherCAT Terminal, 4-channel solid state relay output, multiplexer, 48 V AC/DC, 1 A, potential-free, 1 x 4	EL2521-0124 \| EtherCAT Terminal, 1-channel pulse train output, incr. enc. simulation, 24 V DC, 1 A, with capture/compare input/output	EL2252 \| EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, timestamp
EL2024 \| EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A	ELM2742-0000 \| EtherCAT Terminal, 2-channel solid state relay output, multiplexer, 48 V AC/DC, 1 A, potential-free, 1 x 4	EL2722 \| EtherCAT Terminal, 2-channel triac output, 12…230 V AC, 1 A

Thông tin sản phẩm

Sản phẩm

Tỉ giá

Hỗ trợ trực tuyến